The SunRay Quad is a large-area UV light-curing flood lamp system. All components are integrated into a single unit that can be easily mounted on the optional Rayven Quad benchtop curing chamber or anywhere on a factory floor with virtually no cabling or remote power boxes required. Just mount the lamp head, connect the AC line cord and start timed exposure curing.
The four long-life arc lamps and parabolic reflectors illuminate a 16 x 12” curing area with evenly distributed UV light. The arc lamps are powered by the state-of-the-art UV Power-Plus Lamp Driver.
For a compact version of this system, see the SunRay.
Lamp power regulation: The system’s switch mode power supply maintains constant lamp power regardless of variations in AC line input or lamp voltages. This regulation provides for repeatable curing times and longer lamp life.
Standby mode: The unit features a standby mode rocker switch, which reduces lamp power when the system is idling. This mode can be used to reduce heat and stray UV light output while the system is not in use.
Front panel display and indicators: A front panel hour meter tracks lamp age, allowing for consistent lamp replacement scheduling. Lamp fault and system power-on LEDs provide system status information.
External logic signal interface: The system can be remotely monitored and controlled using logic signals available at a D-sub connector on the unit’s rear panel. Available signal types are:
- Lamp standby input for variable PWM control of lamp intensity, or for minimizing of lamp power during idle periods
- Lamp-out indicator activates if any lamp has extinguished
- Hour meter reset input for zeroing hours display after lamp replacement
- 24VDC at 2A output for powering external fans, relays, solenoids or motors
Forced air cooling: Variable speed cooling fans with removable filters direct air to critical system components, ensuring cool operation and high system reliability.
Best-in-class lamp life: The enhanced lamp life of the system rivals even microwave and LED systems, significantly lowering operating and maintenance costs.
Optional lamp spectrums: The SunRay Quad is available with UVA, UVB and visible spectrum lamps ensuring compatibility with adhesives and coatings from all manufacturers.
| SunRay Quad Specifications | |
|---|---|
| System Type | Parabolic Flood Curing System |
| Part # | UV2842 |
| Lamp Power | 2400W (4 x 600W) |
| Input Voltage | 200–240 VAC ±10% |
| Input Current (Max) | 16 Amps |
| Irradiance @ 4" | 110 mW/cm2 UVA, typical |
| Curing Area | 16 x 12" |
| Weight | 24.5 lbs |
| Size (L x W x H) | 17.45 x 23 x 7.75” |
| Part No. | Item | Details |
|---|---|---|
| UV2875 | Rayven Quad | Shielded Curing Chamber w/ shutter door interlock |
| UV2605 | Quad Flood Filter Glass | Replacement filter glass for SunRay and IntelliRay Quad floods. Filters shortwave and infrared wavelengths |
| UV0526 | Logic Remote Interface Cable | Control from PLC or digital logic |
| (Multiple) | Power cords | Multiple types available |
| (Multiple) | UV Curing Tray | Stainless steel non-stick surface |
| UV1450-xx | Uvicure Plus II Integrating Radiometer | UVA, UVB or Visible ranges, 10–10,000mW/cm2 |
| UV0495 | UV/IR Protective Safety Glasses | OTG (fit over prescription eyewear), 3.0 shade |
| UV02231 | UV/IR Protective Safety Glasses | Sport contour, 3.0 shade |
| UV01889 | UV Protective Face Shield | Lift-up face shield ideal for maximum UV/Visible light protection, 4.0 shade |
| Replacement Lamps: | ||
| UV0834 | UVA Metal Halide Lamp | 600W medium pressure |
| UV1884 | UVB Enhanced Lamp | 600W medium pressure |
| UV1074 | Visible Metal Halide Lamp | 600W medium pressure, 420nm |
Request Quote for SunRay Quad
Request a quote for the version of the SunRay Quad flood system that best fits your needs.
Below you can choose from the different available models, components and accessories for this system. You can select each item one at a time or begin with the Default Configuration as a basis, and build from there.
If you have any questions contact us directly.
System Type and Included Items
The default SunRay Quad configuration comes with Flood Filter Glass, four 600 Watt UVA enhanced arc lamps, pair of UV/IR protective OTG glasses (3.0 shade with case), pair of Cotton Knit Work Gloves (large size, UV protective), AC power cord (USA standard), two Small Rubber Suction-cup Lifter and SunRay Quad Manual.
SunRay Quad - UV2842-NL
Large area economical flood curing system. UVA lamps included by default unless otherwise selected below.
Choose Lamp Type
The SunRay Quad is available with UVA, UVB & visible spectrum lamps, ensuring compatibility with adhesives and coatings from all manufacturers.
600W UVA lamps (4 req'd) - UV0834
Four 600W UVA enhanced arc lamps for SunRay Quad system
600W UVB lamp (4 req'd) - UV01884
Four 600W UVB enhanced arc lamps for SunRay Quad system
600W Visible lamp (4 req'd) - UV1074
Four 600W Visible enhanced arc lamps for SunRay Quad system
Choose Mounting & Shielding Option
The default Quad Rayven configuration comes with an adjustable height shelf, a male to female 15 position DSUB lamp interconnect cable and a Quad Rayven Instruction Sheet.
Rayven Quad - UV2875
UV shielded curing chamber for IntelliRay & SunRay Quad floods
No Mounting or Shielding Options
This option removes the Rayven Quad chamber
Accessories
Click to add any accessories below that you would like included in your quote. To view or price more accessories or replacement parts, visit our online store.
UVICure Plus II Radiometer - UV1450-MA
Single Channel, Mid Power Radiometer to monitor SunRay Quad intensity output in the UVA (320-390 nm) bandwidth. Ideal for UVA enhanced lamps. For other spectral types visit online store.
IS310 UV Logger - UV4007
Single Channel, Economical Profiling Radiometer to monitor SunRay Quad intensity output in the UVA & UVB (280-400 nm) bandwidths. For other radiometer types visit online store.
UV Protective Face Shield - UV1889
Lift-up face shield, ideal for maximum UV/Visible light protection, 4.0 shade.
Stainless Steel Curing Tray - UV4269
Versatile stainless steel UV curing tray used with Rayven chamber for custom curing applications. Dimensions: 16" x 12" x 1"