Radiometers
Ensure Precision and Quality with Our Advanced Range of Radiometers
UVICure Plus II
- Measures intensity of a single spectral response range (chosen at time of order)
- Used in curing applications of inks, adhesives, soldermasks and epoxies (not for use in web press applications)
- Display scrolls through UV dosage in J/cm2 and peak UV intensity in W/cm2 for single UV spectral response range
- Measures lamp performance (and possible bandwidth shift for doped lamps)
- Compares the efficiencies of different UV light curing systems
Power Puck II
- Incorporates four separate spectral response ranges and measures all four simultaneously
- Used in curing applications of inks, adhesives, soldermasks and epoxies (not for use in web press applications)
- Display scrolls through UV dosage in J/cm2 and peak UV intensity in W/cm2 of all four separate UV spectral response ranges
- Measures lamp performance (and possible bandwidth shift for doped lamps)
- Compares the efficiencies of different UV light curing systems
LEDCure™
- Designed specifically to accurately measure the energy generated by industrial UV LED systems
- The “standard” version shows all data on the display
- The “profiler” version shows data on the display plus downloads the irradiance profile (W/cm² as a function of time) to a computer for further analysis
- High dynamic range (40 W/cm²); user-changeable battery
- Available in four different LED specific response bands
SpotCure
- Monitors the output of a UV spot curing system
- Provides indication of light guide and spot curing system performance
- Measures intensities up to 99.9 W/cm2
- Includes several different size light guide adaptors for maximum flexibility
- Comes in “standard” and “extended” intensity range versions
IS310 UV Logger
- Gives you separate readings for each lamp in your oven
- Stores data for up to nine lamps in nine different ovens
- Able to go underneath most safety barriers and measure close to the substrate to give a more accurate reading of the light intensity where the curing takes place
- Measures UV energy transmitted in J/cm² and peak lamp power in W/cm²
- Comes with free PC data analysis software
ILT800 CureRight
- Effortless results, clear data, easily identifies problem
- 3000 samples per second, integration for up to 10 minutes, store / recall up to 1000 profiles
- Measure pulsed and continuous sources
- Mapping: face horizontally, vertically
- Linear response—no range selection required
LTF-631 Cure Monitor™
- Lambient Technologies high-speed dielectric cure monitor
- Measures the cure of rapidly reacting materials in research and development, quality assurance / quality control and manufacturing applications
- Ideal for use with thermoset materials such as UV-cured films, resins, composites, paints and coatings
- Provides data about cure that no other method can offer
MicroCure Sensor and Data Reader
- Two components: data collection radiometer and data reader
- Measures the total amount of UV energy that would be impinged on a work piece passing through the curing system and the peak UV irradiance
- Measures total energy density in J/cm2
- Measures peak power density in W/cm2
PowerMAP II Radiometer
- Provides the irradiance (W/cm²), energy density (J/cm²), irradiance profile (W/cm² as a function of time) and temperature profile (°C as a function of time)
- Measures UV in four (UVA, UVB, UVC, UVV) EIT spectral regions
- Compact size allows it to measure UV in areas not previously accessible
- Available with UVA, UVB, UVC and UVV in a 10 W/cm2 dynamic range