The SunRay Quad is a large-area UV flood curing system. All system components are integrated into a single unit that can be easily mounted on the optional Rayven Quad benchtop curing chamber or anywhere on a factory floor, with virtually no cabling or remote power boxes required. Just mount the lamp head, connect the AC line cord, and start timed exposure curing! The 4 long-life arc lamps and parabolic reflectors illuminate an 16 x 12 inch curing area with evenly distributed UV light. The arc lamps are powered by the state of the art UV Power-Plus Lamp Driver. For a compact version of this system, see the SunRay.
The system’s switch mode power supply maintains constant lamp power regardless of variations in AC line input or lamp voltages. This regulation provides for repeatable curing times and longer lamp life.
The unit features a standby mode rocker switch, which reduces lamp power when the system is idling. This mode can be used to reduce heat and stray UV light output while the system is not in use.
A front panel hour meter tracks lamp age, allowing for consistent lamp replacement scheduling. Lamp Fault & System Power-on LEDs provide system status information.
The system can be remotely monitored and controlled using logic signals available at a D-sub connector on the unit’s rear panel. Available signal types are:
Variable speed cooling fans with removable filters direct air to critical system components, ensuring cool operation and high system reliability.
The SunRay Quad is available with UVA, UVB & visible spectrum lamps ensuring compatibility with adhesives and coatings from all manufacturers.
| Product Files |
|---|
| Specifications | |
|---|---|
| System Type | Parabolic Flood Curing System |
| Part # | UV2842 |
| Lamp Power | 2400W (4 x 600W) |
| Input Voltage | 200-240 VAC ±10% |
| Input Current (Max) | 16 Amps |
| Irradiance @ 4" |
110 mW/cm2 UVA, typical |
| Curing Area | 16" x 12" |
| Weight | 24.5 lbs |
| Size (L x W x H) | 17.45” x 23” x 7.75” |
| Product Files |
|---|
| Specifications | |
|---|---|
| System Type | Parabolic Flood Curing System |
| Part # | UV2842 |
| Lamp Power | 2400W (4 x 600W) |
| Input Voltage | 200-240 VAC ±10% |
| Input Current (Max) | 16 Amps |
| Irradiance @ 4" |
110 mW/cm2 UVA, typical |
| Curing Area | 16" x 12" |
| Weight | 24.5 lbs |
| Size (L x W x H) | 17.45” x 23” x 7.75” |
| Part No. | Item | Details |
|---|---|---|
| UV2842 | SunRay Quad, 240VAC, 50/60Hz | Includes 4x 600W UVA enhanced arc lamps, UV/IR protective glasses, power cord and manual |
| Options & Accessories: | ||
| UV2875 | Rayven Quad | Shielded Curing Chamber w/ shutter door interlock |
| UV2605 | Quad Flood Filter Glass | Replacement filter glass for SunRay and IntelliRay Quad floods. Filters shortwave and infrared wavelengths |
| UV0526 | Logic Remote Interface Cable | Control from PLC or digital logic |
| (Multiple) | Power cords | Multiple types available |
| (Multiple) | UV Curing Tray | Stainless steel non-stick surface |
| UV1450-xx | Uvicure Plus II Integrating Radiometer | UVA, UVB or Visible ranges, 10-10,000mW/cm2 |
| UV0495 | UV/IR Protective Safety Glasses | OTG (fit over prescription eyewear), 3.0 shade |
| UV02231 | UV/IR Protective Safety Glasses | Sport contour, 3.0 shade |
| UV01889 | UV Protective Face Shield | Lift-up face shield ideal for maximum UV/Visible light protection, 4.0 shade |
| Replacement Lamps: | ||
| UV0834 | UVA Metal Halide Lamp | 600W medium pressure |
| UV1884 | UVB Enhanced Lamp | 600W medium pressure |
| UV1074 | Visible Metal Halide Lamp | 600W medium pressure, 420nm |
413.731.7835
info@uvitron.com
