Economical Arc Lamp Power Supply

Uvitron Economical UV Arc Lamp Power Supply
  • Constant power regulated
  • Integrated lamp ignitor
  • Available as 400W or 600W
  • Lightweight, smaller size
  • Comprehensive circuit protection
  • Low cost, Field proven design
Uvitron Economical UV Arc Lamp Power Supply

Product Summary

This compact switch-mode power source provides constant power to a 400/600 Watt mercury vapor or metal halide medium pressure arc lamp. The supply is available in a 100/120VAC (400W: UV0902, 600W: UV2279) or a 200/240VAC (400W: UV1241, 600W: UV1242) version to accommodate international use. A "standby" switch signal is provided for reducing output power while the system is idle. The unit also contains an un-isolated 12 Volt output for powering a local cooling fan. An integrated lamp igniter is provided which eliminates the need for an external high-voltage starter.

Two Input Voltage Range Options Available

The unit is available in a 90 to 132VAC or 180 to 265VAC input range making the Uvitron lamp power supply easy to use in any country.

Integrated High-Voltage Lamp Starter

The unit’s lamp starter provides up to 10kV, enough voltage for igniting virtually any lamp. This high voltage capability allows instant hot lamp restarts after short line voltage interruptions (2 seconds typical). The igniter also has a timeout shutdown feature for protection with defective or disconnected lamps.

Lamp Power Regulation

To maintain constant power, the system divides the desired output power by the actual lamp voltage. This provides the appropriate current reference for the lamp regulator to compensate for lamp and line voltage variations. The result is repeatable curing times as the lamp ages, when the lamp is replaced, or when the input voltage fluctuates.

Standby Power Mode

The unit has an external standby input for reducing lamp power to 1/2 for the 400W and 1/3 for the 600W. This can reduce excess heat and power consumption during idle therefore increasing system reliability, efficiency and reducing ambient temperature rise.

Status Indicators

An on-board Ready LED is provided which lights to indicate that lamp warm-up has completed.

 

Power Supply Part Numbers

Part No. Item
UV0902 Economical Arc Lamp Power Supply (400W, 120VAC)
UV1241 Economical Arc Lamp Power Supply (400W, 240VAC)
UV2279 Economical Arc Lamp Power Supply (600W, 120VAC)
UV1242 Economical Arc Lamp Power Supply (600W, 240VAC)

 

Accessories Part Numbers

Part No. Item Description
UV0582 UV Intensity Controller Controller used as an accessory to the UV switching power supplies
UV0320 UVA Metal Halide Lamp 400W medium pressure
UV0544 UVB Enhanced Lamp 400W medium pressure
UV0489 Visible Metal Halide Lamp 400W medium pressure, 420nm
UV0545 Visible Metal Halide Lamp 400W medium pressure, 460nm
UV0834 UVA Metal Halide Lamp 600W medium pressure
UV1884 UVB Enhanced Lamp 600W medium pressure
UV1074 Visible Metal Halide Lamp 600W medium pressure, 420nm

 

Additional Product Information

Product Files
Specifications
Part # UV0902
(120V)
UV2279
(120V)
UV1241
(240V)
UV1242
(240V)
Lamp Power 400W 600W
Input Voltage 100-120 ±10% /
200-240 ±10% VAC
Input Current (max @ low line, 120VAC) 7
Amps
10
Amps
Input Current (max @ low line, 240VAC) 3.5
Amps
5
Amps
Source Input Frequency 47 Hz to 63 Hz
Brownouts 80V for 1 minute, system continues to operate normally
Efficiency 93% (Typical)
Lamp Info
Lamp Type Mercury vapor or metal halide
Lamp Power 400/600 Watts ± 10%; Trim pot adjustable
Output Voltage 140 ± 10%
Wave Shape 75 Hz Quasi Square (Current / Voltage)
Lamp Power Regulation ± 1%
Operation Continuous Mode
Low Voltage
Fan Power Supply 12 VDC ± 10%
Max current (un-isolated) 2 Watts
Protection
  • Inrush Current Limit
  • Line Voltage Surge
  • Short Circuit (Lamp, 5V, and 24V outputs)
  • Open Circuit Voltage
  • Over Temperature
  • Ignition Timeout (320 seconds typical)
Environmental
Operating Temperature 0°C to +55°C
Storage Temperature 0°C to +70°C
Humidity 90% relative (w/ no condensation)
EMI RFI – Conducted FCC Class A (On board filter)
EMI RFI – Conducted FCC Class B (w/ external filter)
Dimensions
L x W x H 7.25” x 4.25” x 2” (Including ¼” standoffs)
Weight 1.5 lbs