SunRay Quad - Large Area UV Flood Curing System

Uvitron SunRay Quad - UV Quad Flood Light Curing System
  • 4 long-life arc lamps with parabolic reflectors
  • 110 mW/cm2 Intensity @ 4"
  • Large 16" x 12" curing area (4x larger than standard SunRay)
  • Solid-state / Constant power
  • Standby Power Switch
  • Optional shielded benchtop curing chamber
Uvitron SunRay Quad - UV Quad Flood Light Curing System

Product Summary

SunRay Quad with Rayven Quad curing chamber
SunRay Quad with
Rayven Quad curing oven

The SunRay Quad is a large-area UV flood curing system. All system components are integrated into a single unit that can be easily mounted on the optional Rayven Quad benchtop curing chamber or anywhere on a factory floor, with virtually no cabling or remote power boxes required. Just mount the lamp head, connect the AC line cord, and start timed exposure curing! The 4 long-life arc lamps and parabolic reflectors illuminate an 16 x 12 inch curing area with evenly distributed UV light. The arc lamps are powered by the state of the art UV Power-Plus Lamp Driver. For a compact version of this system, see the SunRay.

Lamp Power Regulation

The system’s switch mode power supply maintains constant lamp power regardless of variations in AC line input or lamp voltages. This regulation provides for repeatable curing times and longer lamp life.

Standby Mode

The unit features a standby mode rocker switch, which reduces lamp power when the system is idling. This mode can be used to reduce heat and stray UV light output while the system is not in use.

Front Panel Display & Indicators

A front panel hour meter tracks lamp age, allowing for consistent lamp replacement scheduling. Lamp Fault & System Power-on LEDs provide system status information.

External Logic Signal Interface

The system can be remotely monitored and controlled using logic signals available at a D-sub connector on the unit’s rear panel. Available signal types are:

  • Lamp standby input for variable PWM control of lamp intensity, or for minimizing of lamp power during idle periods
  • Lamp-out indicator, activates if any lamp has extinguished
  • Hour meter reset input for zeroing hours display after lamp replacement
  • 24VDC @ 2 Amp output for powering external fans, relays, solenoids or motors

Forced Air Cooling

Variable speed cooling fans with removable filters direct air to critical system components, ensuring cool operation and high system reliability.

Optional Lamp Spectrums

The SunRay Quad is available with UVA, UVB & visible spectrum lamps ensuring compatibility with adhesives and coatings from all manufacturers.

Best-in-Class Lamp Life

The enhanced lamp life of the system rivals even microwave and LED systems, significantly lowering operating and maintenance costs.

Typical lamp life (intensity versus time)

 

Ordering Part Numbers

Part No. Item Details
UV2842 SunRay Quad, 240VAC, 50/60Hz Includes 4x 600W UVA enhanced arc lamps, UV/IR protective glasses, power cord and manual
Options & Accessories:
UV2875 Rayven Quad Shielded Curing Chamber w/ shutter door interlock
UV2605 Quad Flood Filter Glass Replacement filter glass for SunRay and IntelliRay Quad floods. Filters shortwave and infrared wavelengths
UV0526 Logic Remote Interface Cable Control from PLC or digital logic
(Multiple) Power cords Multiple types available
UV1450-xx Uvicure Plus II Integrating Radiometer UVA, UVB or Visible ranges, 10-10,000mW/cm2
UV0495 UV/IR Protective Safety Glasses OTG (fit over prescription eyewear), 3.0 shade
UV02231 UV/IR Protective Safety Glasses Sport contour, 3.0 shade
UV01889 UV Protective Face Shield Lift-up face shield ideal for maximum UV/Visible light protection, 4.0 shade
Replacement Lamps:
UV0834 UVA Metal Halide Lamp 600W medium pressure
UV1884 UVB Enhanced Lamp 600W medium pressure
UV1074 Visible Metal Halide Lamp 600W medium pressure, 420nm

 

Additional Product Information

Product Files
Specifications
System Type Parabolic Flood Curing System
Part # UV2842
Lamp Power 2400W (4 x 600W)
Input Voltage 200-240 VAC ±10%
Input Current (Max) 16 Amps
Irradiance
@ 4"
110 mW/cm2 UVA, typical
Curing Area 16" x 12"
Weight 24.5 lbs
Size (L x W x H) 17.45” x 23” x 7.75”