Microprocessor Control of Time & Intensity

Integrated Exposure Shutter

Remote Control & Reporting via PC or PLC

High Intensity /Large Curing Area

Solid-state/Constant Power 

Optional  UV Shield & Mounting Stand

The INTELLI-RAY 400 is a compact microprocessor controlled UV flood curing system. Unlike competitors units, the INTELLI-RAY integrates all system components into a small lamp head which can be easily mounted anywhere on a factory floor, with virtually no cabling or remote control boxes required. Just mount the head, connect the AC line cord, and start timed exposure curing! The system contains an integrated retractable shade type shutter, which allows for repeatable exposure timing, and shields the user from UV radiation. The system’s LCD display and digital keypad make programming and monitoring of curing operations a snap. The long life 400-Watt metal halide type lamp and parabolic reflector illuminate an 8 x 6 inch curing area with evenly distributed 100mW/cm² UVA light (320–390nm). The arc lamp is powered by the state of the art UV Power-Plus Lamp Driver. The head features a convenient carrying handle and sliding height adjustment bracket.

Now available - higher intensity 600W version!

FEATURES

System Timers

Duration of curing is controlled by a 1 to 9999 second exposure timer that actuates the shutter.  The exposure timer also has a user controlled manual mode

Lamp Intensity Control

The system has a user adjustable intensity level. This feature provides the flexibility of choosing appropriate curing intensity for sensitive materials.

Standby mode

The IntelliRay can be PC or PLC controlled

The unit automatically reduces lamp power by one half when the shutter is closed. This reduces excessive heat and therefore increases life of system components, without the need to power down.

Status Indicators

Four front panel LEDs are provided: Lamp ready, system in standby mode, shutter open, and system alarm.

External logic signal interface

The system can be remotely monitored and controlled using logic signals available at a 15 pin D-sub connector on the unit’s rear panel. The digital logic functions allow high speed control of the IntelliRay for applications requiring a direct interface with machine controllers or PLCs.

Remote control via PC serial port